TESTIMONIALS

Jar Data from “SPARTAN THRU TUBING” (JEFF MILLER)
10/17/11

1.Job Objective:   “To fish out stuck 16′ slickline tools”   Fluid Type: 4% KCL  Fluid Wt: 8.5#   BHT: 300*

Deviation: 17 degrees Jar OD: 2 1/8″  Jar Licks (10,000-20,000#) =1 Conclusion: Pulled Fish Free

10/21/2011

2.Job Objective:   “To fish out PX Plug”  Fluid Type: 4% KCL  Fluid Wt: 8.5#   BHT: 300*

Deviation: 15 degrees Jar OD: 1 11/16″  Jar Licks (5,000-10,000#) =26 puh/48 cycle out

Conclusion: pulled fish loose/puh hung up in next nipple

12/24/2011

3.Job Objective:   “To fish out 180′ thru tubing gravel pack screens” Fluid Type: Brine  Fluid Wt: 10.5#

BHT: 250* Deviation: 26 degrees Jar OD: 1 11/16″  Jar Licks (5,000-10,000#) =6

Conclusion: pulled fish free

2/6/2012

4.Job Objective:   “To fish out 28′ stuck eline setting tool bha” Fluid Type: Brine  Fluid Wt: 9.7#

BHT: 310* Deviation: straight Jar OD: 2 7/8″  Jar Licks (10,000-20,000#) =1 (20,000-30,000)=1

Conclusion: pulled fish free

3/18/2012

5.Job Objective:   “To fish out 38′ stuck eline guage ring tools” Fluid Type: 4% KCL Fluid Wt: 8.5#

BHT: 320* Deviation: 20 degrees Jar OD: 2 7/8″  Jar Licks (10,000-20,000#) =2 (20,000-30,000)=1

Conclusion: Broke cablehead off of fish

4/23/12

6.Job Objective:   “Milling Job/got hung up on gas lift valve pooh” Fluid Type: 4% KCL Fluid Wt: 8.5#

BHT: 300* Deviation: 15 degrees Jar OD: 1 11/16″  Jar Licks (5,000-10,000#) =15

Conclusion: Fired both ways/stayed stuck/disconnect

4/26/12

7.Job Objective:   “To fish out 36′ of stuck eline guage ring tools” Fluid Type: Oil base Mud Fluid Wt: 16.0#

BHT: 320* Deviation: 20 degrees Jar OD: 2 7/8″  Jar Licks (10,000-20,000#) =10 (20,000-30,000)=27

Conclusion: Broke grapple in overshot

4/27/2012

8.Job Objective:   “To fish out 36′ of stuck eline guage ring tools” Fluid Type: Oil base Mud Fluid Wt: 16.0#

BHT: 320* Deviation: 20 degrees Jar OD: 2 7/8″  Jar Licks (10,000-20,000#) =5 (20,000-30,000)=25

Conclusion: Pulled Fish free